SMF & MACHINE TOOLS, INC.
14824 Rockbridge Rd Little Rock, AR 72206 fax 501-897-4090
800-643-5839 Rick Seeman
Home Page | Used Equipment | New Equipment | Media | Compounds | Email Us

1 Rampe Model HT-3032-1 tumbling barrel with:
13.8 cubic foot total volume, heavy-duty barrel finishing machine.

The HT-3032 frame is constructed of structural steel and heavy gauge tubing continuously welded to provide a rigid frame structure that will support the heaviest barrel loads.

The HT-3032 utilizes a "RAMPART Floating Drive" for continuous low maintenance operation and is powered by a 2 H.P., 1800 R.P.M., TEFC brake motor to stop and hold the barrel in any position for loading and unloading. The machine utilizes an "Electronic" variable speed drive from 8 to 24 R.P.M., with programmable Jog speed, a process speed control is mounted in the control panel.

The HT-3032 standard machine control package includes Emergency stop push button, Run/Off/spring return to Off Jog selector switch, with forward reverse push buttons for two hand requirement on Jog, and safety gate interlock switch are all part of the standard package. The primary electrical circuit is 230 or 460 Volts (must specify voltage on purchase order), 3 Phase, 60 Hertz with a 115 Volt control circuit.

The HT-3032-1 consists of (1) B-3032 "No-Seam" vinyl lined barrel measuring 30" in diameter across the flats X 32" wide. The barrel is fabricated from 1/4" steel plate continuous welded water tight prior to coating. The door opening is 20-7/8" left to right by 11-3/4" front to back. A solid "CAM-LOCK" door complete with vinyl door gasket provides a water tight seal and relieves pressure build-up inside the barrel. The barrel is bolted in place between (2) flanged turntable plates to allow quick replacement without major disassembly of the machine or drive.

The HT-3032-1 will handle up to 1,200 lbs. of parts and media. This range covers most finishing applications.

The HT-3032-1 is fully tested under simulated production conditions prior to shipment to insure that the machine is 100% ready for production.

Price $22,450.

RAMPART MODEL HT-3032-1 URETHANE- Same description as above with Urethane lined barrel $23,940.

OPTIONS HT-3032-1

RAMPART MODEL B-3024 drain door to permit the removal of liquids from the barrel prior to unloading. $555.

ROTO-RINSE- To allow liquid to be added to the barrel while the machine is running or to fill the barrel without a hose. $680.

DIGITAL TACHOMETER-$690.

Chute located under barrel to direct parts and media onto screener or bin. $1,160.

Prices F.O.B. factory, Cleveland, Ohio

Terms: 25% down payment with written purchase order, balance net 30 days (with approved credit)

Delivery: 14 weeks after receipt of written purchase order and down payment. Note: Delivery date may vary due to backlog at the time of order.


Sincerely,

Rick Seeman, Sales
SMF & Machine Tools, Inc.


Return to New Equipment Page